IOS-XR Upgrade Procedure on Cisco NCS-55A2

IPROUTES LLC Forums General Routing and Switching IOS-XR Upgrade Procedure on Cisco NCS-55A2

This topic contains 0 replies, has 1 voice, and was last updated by  IPRoutes 1 month, 1 week ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #157

    IPRoutes
    Keymaster

    Download software using SCP:

    Procedure not shown.

    Verify package :

    RP/0/RP0/CPU0:NCS-55A2#dir harddisk:
    Wed May 15 16:42:40.006 PDT

    Directory of harddisk:
    (Truncated)
    22 -rw-r–r–. 1 1486714880 May 15 13:39 NCS5500-iosxr-k9-6.5.3.tar

    Add software:

    RP/0/RP0/CPU0:NCS-55A2#install add source harddisk: NCS5500-iosxr-k9-6.5.3.tar
    Wed May 15 16:43:55.418 PDT
    May 15 16:43:57 Install operation 36 started by Capricorn:
    install add source harddisk: NCS5500-iosxr-k9-6.5.3.tar
    May 15 16:43:59 Install operation will continue in the background

    RP/0/RP0/CPU0:NCS-55A2#sh install request
    Wed May 15 16:45:48.331 PDT

    The install add operation 36 is 60% complete
    RP/0/RP0/CPU0:NCS-55A2#sh install request
    Wed May 15 16:45:59.000 PDT

    The install add operation 36 is 60% complete
    RP/0/RP0/CPU0:NCS-55A2#May 15 16:47:05 Install operation 36 finished successfully

    Prepare Software for Activation:

    RP/0/RP0/CPU0:NCS-55A2#install prepare id 36 synchronous
    Wed May 15 16:47:57.041 PDT
    May 15 16:47:58 Install operation 37 started by Capricorn:
    install prepare id 36 synchronous
    May 15 16:47:59 Package list:
    May 15 16:47:59 ncs5500-ospf-2.0.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mpls-te-rsvp-3.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-k9sec-3.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mgbl-3.0.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mini-x-6.5.3
    May 15 16:47:59 ncs5500-mpls-2.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-li-1.0.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mcast-2.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-isis-2.1.0.0-r653.x86_64
    May 15 16:48:04 Action 1: install prepare action started
    May 15 16:49:08 The prepared software is set to be activated with reload upgrade
    May 15 16:49:09 Start preparing new VM for reload upgrade

    May 15 17:00:56 All the above nodes completed System Upgrade prepare.
    May 15 17:00:56 Action 1: install prepare action finished successfully
    May 15 17:01:01 Install operation 37 finished successfully
    May 15 17:01:01 Ending operation 37
    RP/0/RP0/CPU0:NCS-55A2#

    RP/0/RP0/CPU0:NCS-55A2#sh install log 37
    Wed May 15 17:26:49.233 PDT
    May 15 16:47:58 Install operation 37 started by Capricorn:
    install prepare id 36 synchronous
    May 15 16:47:59 Package list:
    May 15 16:47:59 ncs5500-ospf-2.0.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mpls-te-rsvp-3.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-k9sec-3.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mgbl-3.0.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mini-x-6.5.3
    May 15 16:47:59 ncs5500-mpls-2.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-li-1.0.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-mcast-2.1.0.0-r653.x86_64
    May 15 16:47:59 ncs5500-isis-2.1.0.0-r653.x86_64
    May 15 16:48:04 Action 1: install prepare action started
    May 15 16:49:08 The prepared software is set to be activated with reload upgrade
    May 15 16:49:09 Start preparing new VM for reload upgrade
    May 15 17:00:56 All the above nodes completed System Upgrade prepare.
    May 15 17:00:56 Action 1: install prepare action finished successfully
    May 15 17:01:01 Install operation 37 finished successfully
    May 15 17:01:01 Ending operation 37

    Software Activation:

    RP/0/RP0/CPU0:NCS-55A2#install activate
    Wed May 15 17:27:16.543 PDT
    May 15 17:27:17 Install operation 38 started by Capricorn:
    install activate
    This install operation will reload the system, continue?
    [yes/no]:[yes] yes
    May 15 17:27:23 Install operation will continue in the background
    RP/0/RP0/CPU0:NCS-55A2#May 15 17:30:41 Install operation 38 finished successfully

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.